Login/My Account
Contact Us Technics EPC-310MC for Technics SL-10 turntable
TSTSL0010
- Product Info
CARTRIDGE FOR TECHNICS SL-10 SL 10 SL10 TURNTABLE
The SL-10 came equipped with the Technics 310MC moving-coil cartridge and replaceable stylus EPS-310MC. Due to the low output of the moving-coil cartridge, the SL-10 includes a built-in, bypassable MC step-up preamp to allow it to connect to standard phono inputs. The original Technics EPC-310MC moving-coil cartridge was designed with a replaceable stylus: EPS-310MC. Both the cartridge and its stylus have since been discontinued. Alternative cartridges are provided below.
Alternative Cartridges
Very Good: CFT4PSE
For the finest selection of T4P cartridges to replace the discontinued EPC-310MC moving coil stereo cartridge, see below.
Excellent: LPGATSER05L
Seperior: LPGATSER05S
Ultimate: LPGATSER05ML
Please note that the SL-10 does not have a RIAA phono preamp. It has a built-in, bypassable MC step-up preamp to allow a MC cartridge it to connect to standard RIAA phono inputs. When using a MM cartridge, the selector at the back panel must be moved to MM.
- Specifications
Technics EPC-310MC Cartridge Specifications
- Type: Moving-coil stereo cartridge with coreless twin-ring coil; One-point suspension
- Cantilever: Pure Boron pipe
- Damper: TTDD
- Frequency range: 10-60,000 Hz
- Frequency response: 10-10,000 Hz ± 0.5dB
- Output voltage @ 1kHz,5cm/sec: 0.2 mV
- Channel separation: more than 25 dB 1 lHz, more than 20 dB at 10 kHz
- D.C. resistance: 30Ω
- Impedance: 30Ω (Pure resistance)
- Channel balance: within 1 dB at 1 kHz
- Compliance (dynamic): 12 × 10-6 cm/dyne 100 Hz
- Vertical tracking angle: 20°
- Stylus pressure range: 1.25 ± 0.25 g
- Stylus tip: 0.2 × 0.7 mil (5 × 18 µm) Elliptical stylus
- Effective mass: 0.23 mg
- Weight: 6 g
- Inductance: 650 mH
- Replacement stylus: EPS-310MCNote: Specifications based upon operating instructions and provided for reference only.
