Audio-Technica ATN-31E ATN31E phonograph needle stylus

ATN31E Not Yet Rated | Write the First Review
$179.95
Audio-Technica ATN-31E ATN31E phonograph needle stylus
Processing...

Audio-Technica ATN-31E ATN31E phonograph needle stylus

Code: ATN31E Not Yet Rated | Write the First Review
$179.95

Audio-Technica ATN-31E ATN31E phonograph needle stylus is currently unavailable.
Enter your email here to be notified when it is available
Product Info

AUDIO-TECHNICA ATN-31E ATN31E NEEDLE STYLUS

The Audio-Technica ATN-31E ATN31E needle stylus is designed for the highly regarded low-output moving coil Audio-Technica AT-31E AT31E phono cartridge and its private label equivalents. It can also be used an upgrade replacement to elevate the performance of the Audio-Technica AT-30E AT30E phono cartridge. The stylus features a nude elliptical diamond with a .0003 x .0007 inch scanning radii. It offers excellent tracing of record grooves, long playing life and exceptional reproduction and rendition of voice, music and harmonics.

The stylus assembly may be disconnected and replaced more than 2,000 times with no appreciable increase in output noise.

Audio-Technica ATN31E Stylus Specifications
- Frequency response: 15Hz-50kHz
- Output voltage @ 1kHz,5cm/sec: 0.4mV
- Channel separation @ 1kHz: Minimum 30dB
- Channel balance @ 1kHz: Within 1dB
- Dynamic compliance: 8.5 x 10-6 cm/dyne (100 Hz)
- Tracking force: 1.2-1.8g (nominal force 1.5g)
- Static compliance: 32 x 10-6 cm/dyne
- Load resistance: >10 ohms
- Load capacitance: 100-200pf
- Stylus: 0.15 mm nude square, 0.3 x 0.7 mil elliptical diamond

Reviews

Customer Ratings & Reviews

Be the first to rate this item!

Write Review