Login/My Account
Contact Us Music Hall MMF-1.5 turntable Upgrade kit
UPMMF15
● Special aluminum alloy cantilever for superb natural tone and and timbre
● Made in Japan to reproduce with highest fidelity and sound quality
● Harmonically exquisite, multidimensional soundstage
● Spectra elliptical diamond for excellent tracing accuracy
● Diamond tip r/R radii: 8 × 18 µm (.0003 × .0007 inch)
● Stylus Life: Approx. 300 - 1,000 hours (depending on use)
● Vivid Line turntable belt for precision, quiet operation and long-life
● Tacking force: 1.5 - 3.5g
● LP GEAR® ugrade kit - Above and beyond sound quality
- Product Info
MUSIC HALL MMF-1.5 TURNTABLE UPGRADE KIT
The LP Gear upgrade kit for the Music Hall MMF-1.5 turntable improves the clarity, detail, and sound quality of the factory supplied Music Hall MMF1.5 turntable.
The kit is composed of a LP GEAR ALN3600LE stylus (Retail $59.00) featuring a highly polished special elliptical diamond with .0003 x .0007 inch tracing radii bonded to a special aluminum alloy cantilever to reproduce the signal from the record grooves with exceptional precision and natural tone thus resulting in significant better musicality and timbre. You can keep the factory installed stylus that came with the turntable as backup.
Do not order this upgrade kit if your turntable no longer has the factory-mounted Music Hall Melody cartridge and stylus. If you are unsure, please contact us and send photos of your existing cartridge and stylus.How to replace stylus for Music Hall MMF1.5 TURNTABLE RECORD PLAYER
- See: How to replace stylus photo aboveThe LP GEAR Vivid Line belt™ for the Music Hall MMF-1.5 is made from a material that provides a great latitude to seriously enhance the performance of your turntable. The acoustical performance increase derives from higher torque, consistent rotational speed, longevity, and reduced resonance transmitted into the platter, record and phono cartridge. With these improvements you'll soon be enjoying your LPs once again.
Note: After installation, please allow the Super Vivid belt to settle by playing it for 10-15 minutes. During this process, it may fluctuate and cause the pitch to warble.- Specifications
- Technical Specifications
⚬ General Section
- Power supply: DC12V, 2.0A universal power supply
- Consumption: 4W
- Dimensions: 17.1(W) x 14.5(D) x 5(H) in. | 435(W) x 367(D) x 127(H) mm
- Weight: 12 lbs | 5.4 Kg⚬ Turntable Section
- Type: 3-speed full manual
- Motor: DC motor
- Driving method: Belt drive
- Turntable platter: 305mm dia. aluminum die-cast
- Speeds: 33 1/3, 45, and 78rpm
- Wow and flutter: Typical - less than 0.1% WTD at 3KHz RMS(CD-4005)
Limit: Less than 0.15% WTD at 3KHz RMS(CD-4005)
- S/N ratio: Typical - More than 65dB (DIN-B) (SS-4242)
Limit: More than 62dB (DIN-B) (SS-4242)
- Speed tolerance: 3000Hz +/-1%(CD-4005)⚬ Cartridge Section
- Type: Moving Magnet cartridge
- Stylus: Diamond stylus
- Channel separation: > 15 dB at 1KHz (CD-4005)
- Channel balance: Within 2.5 dB at 1KHz (CD-4005)
- Phono output level: 1.5 ~ 3.6 mV at 1KHz 5cm/sec (CD-4005)
- Line output: 90-216 mV at 1KHz 5cm/sec (CD-4005)
- RIAA: 20Hz ~ 20KHz +1/-3 dB⚬ Cartridge
- Cartridge: Music Hall Melody
- Output voltage: 2.5mV +/- 3dB at 1KHz 3.54cm/sec
- Channel separation measurement point 1KHz: over 18dB
- Channel balance: 25 dB or less at 1KHz
- Frequency response: measurement point 10KHz / 1KHz 0 +/- 3dB
- Tracking force: 2.0 +/- 0.5 grams⚬ Tonearm Section
- Type: Static balanced S-shaped
- Effective arm length: 230 mm
- Overhang: 15 mm
- Offset angle: 22 degrees
- Tracking error angle: 3 degrees or less
- Stylus pressure adjustment method rotation movability: (1-rotation 4 g)
- Applicable cartridge weight: 5 ~ 8.5 g (including headshell 15~18.5 g)
- Anti-skating adjustment range: 0 ~ 3 g
- Arm lifter: Oil damper type
- Cartridge height (mounting top to stylus tip): 8 ~ 10.5mm
- Lifter descent time: 1.5 ~ 3 sec (stylus pressure: 2 g)
- Horizontal sensitivity: < 0.2 g
- Vertical sensitivity: < 0.2 g
