DENON DP300F DP 300F DP-300F TURNTABLE IMPROVED BY LP GEAR
We knew that the Denon DP-300F turntable is special. It just needed our midas coaxing to transform the DP300F from good to golden.
Below are the Denon DP300F turntable's main features:
Complete Ready-To-Play Turntable
The Denon DP300F turntable comes complete with an installed phono cartridge and built-in switchable on/off phono preamp. It is ready for serious playing. Only minor set-up is required (about 15-20 minutes).
Refined External Design
The Denon DP300F's 4mm thick cabinet wall offers strength, high density and beauty with its glossy black coating. The straight tonearm and aluminum diecast platter have been formed into a slim, attractive design. With a body width of 434mm, the Denon DP-300F combines elegantly with full-sized systems.
Fully Automatic Turntable
When the 30cm or 17cm record size is selected, the tonearm automatically moves and plays the record and then returns when the playback ends.
Highly Capable Straight Tonearm
The DP300F's straight tonearm with fine adjustments for anti-skating and zero balance brings out the maximum performance of cartridges with superior tracing capabilities. The supplied tonearm can be replaced with different cartridges weighing 5.0 - 10g.
Diecast Aluminum Platter
The DP300F's platter is made of diecast aluminum to achieve high inertial mass for stable rotation.
Belt Drive System
The belt isolates the motor from the platter while providing rotational accuracy.
Manual Arm Lifter
The DP300F turntable is also equipped with an arm lifter mechanism to facilitate manual operation. The arm lifter makes it easy to place or remove the stylus from any location on the record.
Built-in Phono Preamp
The DP300F turntable includes a built-in Phono Preamp so that it can be directly connected to a component (receiver, mini system, computer sound card, integrated amp) that does not have a phono preamp. The built-in Phono Preamp is switchable on/off.
Denon DP300F Improved by LP Gear Extracts More Music From the Grooves
We elevated the performance of the Denon DP300F turntable for enhanced music listening and fidelity for recording your LPs to digital. The Denon DP300F begins its ascent in sound quality when you replace the factory installed stylus with our LP Gear DSN85E stylus. You'll hear more defined multidimensional detail, sparkle, air and micro-dynamics. No, it is not impeccable - even turntables costing 50 times more aren't sonically perfect. But the integration of these special parts to the Denon DP300F enables the turntable to play music beyond expectations.
This package is available for only $229.00 and includes a FREE new LP Gear DSN85E special elliptical stylus (retail value $59.00) for you to install as replacement of the factory supplied stylus.
The improvement in sound quality is priceless!
Denon DP300F Turntable Improved by LP Gear Specifications
- Drive system: Belt system
- Speeds: 33 1/3 RPM, 45 RPM
- Wow and flutter: 0.10% (WRMS)
- Turntable platter: Diecast aluminum
- Tonearm type: Straight
- Tonearm effective length: 221.5mm (8.72 inch)
- Overhang: 19mm (0.75 inch)
- Tracking error: Within 3°
- Stylus pressure range: 0-4g (0.1g increments)
- Cartridge type: Moving magnet
- Appropriate tracking force: 2g
- Weight: 5g
- Compatible cartridge weight: 5-10g (excluding headshell)
- Supplied heashell weight: 10g
- Stylus replacement: LP Gear DSN85E
- Power supply requirements: AC 120V, 60Hz
- Power consumption: 2W
- Dimensions: 17.1"w x 4.8"h x 15"d
- Weight: 5.5kg (12.13 lbs.)