AT-LP120 A3SE cartridge Ultimate Upgrade

ATLP120A2SEULTUPG
$148.00
AT-LP120 A3SE cartridge Ultimate Upgrade

"LP Gear's The Vessel A3SE cartridge is an absolute world-beater at $99. To say I was wowed is a huge understatement, and I very clearly preferred The Vessel A3SE to a lot of $400 cartridges I have tried before. The presentation is slightly forward in perspective, with sound that is silky-smooth, rich, clean, precise and detailed, with beautiful tonality from deepest bass to highest treble. The superlatives just flow when describing it, just as beautiful music flows from this exceptional cartridge." - Don Lindich, Sound Advice Q&A Newspaper Column"1

LP GEAR® Ultimate ½ inch mount headshell
Precision 2.5 mm special Duralumin for strength and low resonance
SOAR HD5 headshell wires for exceptional sound quality
Aligned length ∼52 mm for use with many tonearms
Alignment adjustable for extra precision and compatibility
Free alignment protractor
15.6g weight with mounted The Vessel A3SE cartridge

Processing...

AT-LP120 A3SE cartridge Ultimate Upgrade

Code: ATLP120A2SEULTUPG
Retail: $148.00
$148.00

A3SE Cartridge Ultimate Upgrade, Silver: See Related Products.
Product Info

AT-LP120 A3SE CAETRIDGE ULTIMATE UPGRADE
- The Vessel A3SE cartridge pre-mounted on world-class LP GEAR Ultimate Headshell

Enjoy completely the wonderfully disruptive Full Spectra Sound and sentience of the A3SE cartridge.2 It significantly upgrades the sound quality of the AT=LP120 and any type of music on your list. The LP Gear premounted The Vessel A3SE cartridge with Ultimate (U) Headshell offers excellence in sound quality above and beyond the factory installed AT95E cartridge.
- LP GEAR® Ultimate half-inch mount headshell
- Precision processed 2.5 mm high rigidity Duralumin
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 15.6g with The Vessel A3SE cartridge is suited to more turntables and their tonearms. There is no need to change the counterweight.

The Vessel A3SE Cartridge Specifications
- Type: Moving Magnet
- Frequency range: 20-25,000 Hz
- Output voltage @ 1kHz: 3.0 mV
- Channel balance @ 1kHz: <1.5dB
- Channel separation @ 1kHz: 22dB
- Dynamic compliance (100Hz): 8 × 10-6 cm/dyne
- Tracking ability at 2.0g : 60 µm
- Cantilever: Special type aluminum pipe
- Stylus type: Super elliptical
- Stylus tip radius: 7.6µm × 15.5µm
- Tracking force: 2.0 g
- Internal impedance @ 1kHz: 670 ohms
- Internal inductance: 270 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 100-300pF
- Cartridge color, body/stylus: Black/Gold/Sky Blue
- Weight: 6.0 g
- Mounting hardware included: 2 × Screws, 2 × Nuts
- Stylus replacement: A3SE stylus

_______________________________________

Footnote 1: Don Lindich, "Sound Advice Q&A Newspaper Column", Sound Advice, February 3, 2017.

- The Vessel A3SE cartridge pre-mounted on world-class LP GEAR Ultimate Headshell

Enjoy completely the wonderfully disruptive Full Spectra Sound and sentience of the A3SE cartridge.2 The LP Gear premounted The Vessel A3SE cartridge with Ultimate (U) Headshell offers excellence in sound quality and compatibility with turntables:
- LP GEAR® Ultimate half-inch mount headshell
- Precision processed 2.5 mm high rigidity Duralumin
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 15.6g with The Vessel A3SE cartridge is suited to more turntables and their tonearms. There is no need to change the counterweight.

The Vessel A3SE Cartridge Specifications
- Type: Moving Magnet
- Frequency range: 20-25,000 Hz
- Output voltage @ 1kHz: 3.0 mV
- Channel balance @ 1kHz: <1.5dB
- Channel separation @ 1kHz: 22dB
- Dynamic compliance (100Hz): 8 × 10-6 cm/dyne
- Tracking ability at 2.0g : 60 µm
- Cantilever: Special type aluminum pipe
- Stylus type: Super elliptical
- Stylus tip radius: 7.6µm × 15.5µm
- Tracking force: 2.0 g
- Internal impedance @ 1kHz: 670 ohms
- Internal inductance: 270 mH
- Recommended load resistance: 47 kOhm
- Cartridge color, body/stylus: Black/Gold/Sky Blue
- Weight: 6.0 g
- Mounting hardware included: 2 × Screws, 2 × Nuts
- Stylus replacement: A3SE stylus

_______________________________________

Footnote 1: Don Lindich, "Sound Advice Q&A Newspaper Column", Sound Advice, February 3, 2017.

- The Vessel A3SE cartridge pre-mounted on world-class LP GEAR Ultimate Headshell

Enjoy completely the wonderfully disruptive Full Spectra Sound and sentience of the A3SE cartridge.2 The LP Gear premounted The Vessel A3SE cartridge with Ultimate (U) Headshell offers excellence in sound quality and compatibility with turntables:
- LP GEAR® Ultimate half-inch mount headshell
- Precision processed 2.5 mm high rigidity Duralumin
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 15.6g with The Vessel A3SE cartridge is suited to more turntables and their tonearms. There is no need to change the counterweight.

The Vessel A3SE Cartridge Specifications
- Type: Moving Magnet
- Frequency range: 20-25,000 Hz
- Output voltage @ 1kHz: 3.0 mV
- Channel balance @ 1kHz: <1.5dB
- Channel separation @ 1kHz: 22dB
- Dynamic compliance (100Hz): 8 × 10-6 cm/dyne
- Tracking ability at 2.0g : 60 µm
- Cantilever: Special type aluminum pipe
- Stylus type: Super elliptical
- Stylus tip radius: 7.6µm × 15.5µm
- Tracking force: 2.0 g
- Internal impedance @ 1kHz: 670 ohms
- Internal inductance: 270 mH
- Recommended load resistance: 47 kOhm
- Cartridge color, body/stylus: Black/Gold/Sky Blue
- Weight: 6.0 g
- Mounting hardware included: 2 × Screws, 2 × Nuts
- Stylus replacement: A3SE stylus

_______________________________________

Footnote 1: Don Lindich, "Sound Advice Q&A Newspaper Column", Sound Advice, February 3, 2017.

- The Vessel A3SE cartridge pre-mounted on world-class LP GEAR Ultimate Headshell

Enjoy completely the wonderfully disruptive Full Spectra Sound and sentience of the A3SE cartridge.2 The LP Gear premounted The Vessel A3SE cartridge with Ultimate (U) Headshell offers excellence in sound quality and compatibility with turntables:
- LP GEAR® Ultimate half-inch mount headshell
- Precision processed 2.5 mm high rigidity Duralumin
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 15.6g with The Vessel A3SE cartridge is suited to more turntables and their tonearms. There is no need to change the counterweight.

The Vessel A3SE Cartridge Specifications
- Type: Moving Magnet
- Frequency range: 20-25,000 Hz
- Output voltage @ 1kHz: 3.0 mV
- Channel balance @ 1kHz: <1.5dB
- Channel separation @ 1kHz: 22dB
- Dynamic compliance (100Hz): 8 × 10-6 cm/dyne
- Tracking ability at 2.0g : 60 µm
- Cantilever: Special type aluminum pipe
- Stylus type: Super elliptical
- Stylus tip radius: 7.6µm × 15.5µm
- Tracking force: 2.0 g
- Internal impedance @ 1kHz: 670 ohms
- Internal inductance: 270 mH
- Recommended load resistance: 47 kOhm
- Cartridge color, body/stylus: Black/Gold/Sky Blue
- Weight: 6.0 g
- Mounting hardware included: 2 × Screws, 2 × Nuts
- Stylus replacement: A3SE stylus

_______________________________________

Footnote 1: Don Lindich, "Sound Advice Q&A Newspaper Column", Sound Advice, February 3, 2017.

Customer Reviews