LP Gear AT95SA SET

LP GEAR AT95SA SET
- AT95Sa cartridge premounted on Ultimate Headshell

Renowned as the best buy in cartridges and probably 10x better than the AT95E¹, the LP Gear premounted AT95SA cartridge with Ultimate Headshell offers assured excellence:
- LP GEAR® Ultimate half-inch mount headshell
- 2.5 mm high rigidity Duralumin for tensile strength and low resonance
- SOAR HD5 headshell wires for exceptional sound quality
- Aligned length 52 mm for use with many tonearms
- Alignment adjustable for extra precision and compatibility
- Free alignment protractor
- Total weight of 16.7g with LP GEAR® AT95SA cartridge is suited to most turntables and their tonearms. There is no need to change the counterweight.

LP Gear AT95SA Phono Cartridge Details
- Output voltage @ 1kHz, 5cm/sec.: 3.0mV
- Channel balance: Within 2dB
- Channel separation @ 1kHz: > 22dB
- Frequency response: 20Hz-22kHz
- Load resistance: 47k ohms
- Load capacitance 100-200 pf
- Stylus type: Shibata diamond
- Stylus construction: Bonded
- Cantilever: Zualum metal alloy
- Tracking force range: 1.5-2.5 g
- Tracking force recommended: 2 g (20 mN)
- Vertical tracking angle: 20°
- Coil impedance @ 1kHz: 2.8k ohms
- Coil inductance @ 1kHz: 400 mH
- Color: Black/Gray
- Weight: 6.6 g
- Dimensions (mm): 30.5L × 17W × 17.20H
- Stylus replacement: LP Gear ATN95SA

Note: Specifications are subject to change without notice.

_______________________________________
¹ Michael Fremer, "Nine Cartridges Reviewed, Compared and File Identities Revealed!", Analog Planet, August 22, 2013.