Rotel turntable belt replacement
A belt-drive turntable is a musical treasure. To ensure that you always have a working belt for your turntable, we recommend that you order two and keep the other as backup. You'll be happy you did many years from now!

Code	Name	Price
RTL0100	Rotel RP-100 turntable belt replacement	$18.90
RTL0300	Rotel RP-300 turntable belt replacement	$18.90
RTL0310	Rotel RP-310 turntable belt replacement	$18.90
RTL0500	Rotel RP-500 turntable belt replacement	$18.90
RTL0830	Rotel RP-830 turntable belt replacement	$19.95
RTL0850	Rotel RP-850 turntable belt replacement	$19.95
RTL0855	Rotel RP-855 turntable belt replacement	$19.95
RTL0900	Rotel RP-900 turntable belt replacement	$19.95
RTL0955	Rotel RP-955 turntable belt replacement	$19.95
RTL1000	Rotel RP-1000 turntable belt replacement	$19.95
RTL1100	Rotel RP-1100 turntable belt replacement	$20.90
RTL1100Q	Rotel RP-1100Q turntable belt replacement	$20.90
RTL1500	Rotel RP-1500 turntable belt replacement	$19.90
RTL2400	Rotel RP-2400 turntable belt replacement	$20.90
RTL2500	Rotel RP-2500 turntable belt replacement	$19.90
RTL4400	Rotel RP-4400 turntable belt replacement	$20.90

If your turntable is not listed, please use our FREE belt matching service below.

FREE Belt Matching Service
If your turntable is not listed, all you need to do is send us via e-mail your existing belt's type (flat, round or square), measurements specifically its length and width in inches, and present working condition (e.g., stretched but still working or no longer working).

To measure your existing belt's dimensions, follow the procedures below.

• If you have the turntable belt:
  •  State the type of belt used (Flat, Square, Round).
  •  Pinch both ends of the belt.
  •  Measure the pinched length.
  •  Multiply the pinched length by two (2x).
  •  If the turntable uses a Flat belt, measure its width (usually 0.187").
  •  If the turntable uses a Round or Square belt, measure its thickness.
  •  Please include the make and model of the turntable with the belt's measurements.
  
• If you do NOT have the turntable belt or it is shredded:
  •  State the type of belt that the turntable uses (Flat, Round or Square).
  •  Use a piece of string to tightly follow the belt's path.
  •  Measure the length of the string.
  •  Measure the width between the rims of the motor pulley that the belt can pass through (usually 0.250 inch).
  •  Please include the make and model of the turntable with the belt's measurements.

You may of course send your belt to us for reference. Please do this only if your belt is not shredded. We'll do our best to find a replacement for you.

LP Gear™
2227 Double Tree Ave
Las Vegas, NV 89052
USA
e-mail: Lpgear@yahoo.com
e-mail: LpgearUSA@hotmail.com