Luxman turntable belt replacement
A belt-drive turntable is a musical treasure. To ensure that you always have a working belt for your turntable, we recommend that you order two and keep the other as backup. You'll be happy you did many years from now!

Code	Name	Price
LUXA522	Luxman A522 turntable belt replacement	$21.95
LUXP007	Luxman P-007 turntable belt replacement	$19.95
LUXP100	Luxman P-100 P100 turntable belt replacement	$19.95
LUXP102	Luxman P-102 P102 turntable belt replacement	$19.95
LUXP405	Luxman P-405 P405 turntable belt replacement	$21.95
LUXP406	Luxman P-406 P406 turntable belt replacement	$17.90
LUXP406SB	Luxman P-406 P406 turntable small belt set replacement	$19.90
LUXPD200	Luxman PD-200 PD200 turntable belt replacement	$21.95
LUXPD210	Luxman PD-210 PD200 turntable belt replacement	$21.95
LUXPD289	Luxman PD-289 turntable tonearm belt replacement	$14.90
LUXPD300	Luxman PD-300 PD300 turntable belt replacement	$34.90
LUXPD310	Luxman PD-310 PD310 turntable belt replacement	$34.90
LUXPD350	Luxman PD-350 PD350 turntable belt replacement	$35.90
LUXPD440	Luxman PD-440 PD440 turntable belt replacement	$35.90
LUXPD555	Luxman PD-555 PD555 turntable belt replacement	$39.95
LUXPD555A	Luxman PD-555 PD555 Anniversary turntable belt replacement	$39.95

If your turntable is not listed, please use our FREE belt matching service below.

FREE Belt Matching Service
If your turntable is not listed, all you need to do is send us via e-mail your existing belt's type (flat, round or square), measurements specifically its length and width in inches, and present working condition (e.g., stretched but still working or no longer working).

To measure your existing belt's dimensions, follow the procedures below.

• If you have the turntable belt:
  •  State the type of belt used (Flat, Square, Round).
  •  Pinch both ends of the belt.
  •  Measure the pinched length.
  •  Multiply the pinched length by two (2x).
  •  If the turntable uses a Flat belt, measure its width (usually 0.187").
  •  If the turntable uses a Round or Square belt, measure its thickness.
  •  Please include the make and model of the turntable with the belt's measurements.
  
• If you do NOT have the turntable belt or it is shredded:
  •  State the type of belt that the turntable uses (Flat, Round or Square).
  •  Use a piece of string to tightly follow the belt's path.
  •  Measure the length of the string.
  •  Measure the width between the rims of the motor pulley that the belt can pass through (usually 0.250 inch).
  •  Please include the make and model of the turntable with the belt's measurements.

You may of course send your belt to us for reference. Please do this only if your belt is not shredded. We'll do our best to find a replacement for you.

LP Gear™
2227 Double Tree Ave
Las Vegas, NV 89052
USA
e-mail: Lpgear@yahoo.com
e-mail: LpgearUSA@hotmail.com