Ion turntable belt replacement
A belt-drive turntable is a musical treasure. To ensure that you always have a working belt for your turntable, we recommend that you order two and keep the other as backup. You'll be happy you did many years from now!

Code	Name	Price
iTT02AB	ion iTT02A turntable belt replacement	$16.90
iTTCD10TB	ion iTTCD10 turntable belt replacement	$16.90
ITTUSB10TB	ion iTTUSB10 turntable belt replacement	$16.90
ITTUSBTB	ion iTTUSB turntable belt replacement	$16.90
ITTUSB05TB	ion iTTUSB05 turntable belt replacement	$17.90
TTUSB05TB	ion TTUSB05 turntable belt replacement	$17.90
TTUSB05XLTB	ion TTUSB05XL turntable belt replacement	$17.90
IPROFILETB	ion iPROFILE turntable belt replacement	$17.90
PROFILEFLASHTB	ion PROFILE FLASH turntable belt replacement	$17.90
PROFILELPTB	ion PROFILE LP turntable belt replacement	$17.90
PROFILELPROTB	ion PROFILE PRO turntable belt replacement	$17.90
LPDOCKTB	ion LP DOCK LPDOCK turntable belt replacement	$16.90
LP2CDTB	ion LP 2 CD LP2CD turntable belt replacement	$16.90

If your turntable is not listed, please use our FREE belt matching service below.

FREE Belt Matching Service
If your turntable is not listed, all you need to do is send us via e-mail your existing belt's type (flat, round or square), measurements specifically its length and width in inches, and present working condition (e.g., stretched but still working or no longer working).

To measure your existing belt's dimensions, follow the procedures below.

• If you have the turntable belt:
  •  State the type of belt used (Flat, Square, Round).
  •  Pinch both ends of the belt.
  •  Measure the pinched length.
  •  Multiply the pinched length by two (2x).
  •  If the turntable uses a Flat belt, measure its width (usually 0.187").
  •  If the turntable uses a Round or Square belt, measure its thickness.
  •  Please include the make and model of the turntable with the belt's measurements.
  
• If you do NOT have the turntable belt or it is shredded:
  •  State the type of belt that the turntable uses (Flat, Round or Square).
  •  Use a piece of string to tightly follow the belt's path.
  •  Measure the length of the string.
  •  Measure the width between the rims of the motor pulley that the belt can pass through (usually 0.250 inch).
  •  Please include the make and model of the turntable with the belt's measurements.

You may of course send your belt to us for reference. Please do this only if your belt is not shredded. We'll do our best to find a replacement for you.

LP Gear™
2227 Double Tree Ave
Las Vegas, NV 89052
USA
e-mail: Lpgear@yahoo.com
e-mail: LpgearUSA@hotmail.com