Ariston turntable belt replacement
A belt-drive turntable is a musical treasure. To ensure that you always have a working belt for your turntable, we recommend that you order two and keep the other as backup. You'll be happy you did many years from now!

Code	Name	Price
ARIS05	Ariston Forte turntable belt replacement	$26.80
ARIS08	Ariston Pro turntable belt replacement	$27.95
ARIS11	Ariston RD-11 RD11 Square turntable belt replacement	$26.95
ARIS110	Ariston RD-110 RD110 turntable belt replacement	$26.95
ARIS11E	Ariston RD-11E RD11E Round turntable belt replacement	$26.95
ARIS11S	Ariston RD-11S RD11S Square turntable belt replacement	$26.95
ARIS11SUP	Ariston RD-11 RD11 Superieur turntable belt replacement	$26.95
ARIS20	Ariston RD-20 RD20 turntable belt replacement	$26.95
ARIS40	Ariston RD-40 RD40 turntable belt replacement	$26.80
ARIS80	Ariston RD-80 RD80 turntable belt replacement	$27.90
ARIS90	Ariston RD-90 RD90 turntable belt replacement	$39.90
ARIS92	Ariston Icon turntable belt replacement	$26.95
ARIS94	Ariston Q-deck turntable belt replacement	$25.90
ARIST97	Ariston Transcription turntable belt replacement	$26.95

If your turntable is not listed, please use our FREE belt matching service below.

FREE Belt Matching Service
If your turntable is not listed, all you need to do is send us via e-mail your existing belt's type (flat, round or square), measurements specifically its length and width in inches, and present working condition (e.g., stretched but still working or no longer working).

To measure your existing belt's dimensions, follow the procedures below.

• If you have the turntable belt:
  •  State the type of belt used (Flat, Square, Round).
  •  Pinch both ends of the belt.
  •  Measure the pinched length.
  •  Multiply the pinched length by two (2x).
  •  If the turntable uses a Flat belt, measure its width (usually 0.187").
  •  If the turntable uses a Round or Square belt, measure its thickness.
  •  Please include the make and model of the turntable with the belt's measurements.
  
• If you do NOT have the turntable belt or it is shredded:
  •  State the type of belt that the turntable uses (Flat, Round or Square).
  •  Use a piece of string to tightly follow the belt's path.
  •  Measure the length of the string.
  •  Measure the width between the rims of the motor pulley that the belt can pass through (usually 0.250 inch).
  •  Please include the make and model of the turntable with the belt's measurements.

You may of course send your belt to us for reference. Please do this only if your belt is not shredded. We'll do our best to find a replacement for you.

LP Gear™
2227 Double Tree Ave
Las Vegas, NV 89052
USA
e-mail: Lpgear@yahoo.com
e-mail: LpgearUSA@hotmail.com